Checking The Shift Shaft; Checking The Stopper Lever; Installing The Shift Shaft - Yamaha XT250X Service Manual

EAS25420

CHECKING THE SHIFT SHAFT

1. Check:
Shift shaft
G
Shift lever
G
Bends/damage/wear → Replace.
Shift lever spring
G
Damage/wear → Replace.
EAS25430

CHECKING THE STOPPER LEVER

1. Check:
Stopper lever
G
Bends/damage → Replace.
Roller turns roughly → Replace the stopper
lever.
EAS25450

INSTALLING THE SHIFT SHAFT

1. Install:
Stopper lever "1"
G
Stopper lever spring
G
Stopper lever bolt
10 Nm (1.0 kg•m)
Apply locking
TITE®)
NOTE:
Hook the ends of the stopper lever spring onto
G
the stopper lever and the crankcase boss.
Mesh the stopper lever with the shift drum seg-
G
ment assembly.
1
2. Install:
Shift shaft assembly "1"
G
NOTE:
Align shaft spring "2" with stopper "3" and as-
semble the shift shaft assembly.
agent (LOC-
5-44
2
3
1
SHIFT SHAFT