Yamaha XT250X Service Manual page 53

1. Fuel tank
2. Roll over valve
3. Canister
4. Canister breather hose
A. Face the end of clip toward the vehicle.
B. Install the hose to fuel tank by facing the white
paint mark left side of the vehicle.
C. Pass through the hose in the space of the tool
box.
D. Install the hose to the roll over valve and canis-
ter.
E. Install the hose to the carburetor and canister.
F. Pass through the hose to the guide.
G. The clip may be installed, which ever direction
end of the clip.
H. Pass through the canister breather hose to the
guide.
I. Install the end of the canister breather hose to
inside of the frame by facing the cut end of the
hose downward.
J. Install the hose to the carburetor by facing the
white paint mark left side of the vehicle.
K. Pass through the hose onto the guide.
L. Face the end of clip right side of the vehicle.
M. Face the end of clip downward of the vehicle.
N. Fasten the hose and cylinder head breather
hose by using the clamp.
2-34
CABLE ROUTING