To Program Speed Dialling - Olivetti OFX 120 Instructions Manual

8
Dial the number as in transmission, with the fol-
lowing possible variants.
1 If I am connected to a private line :
• • • • • Set the transfer mode for access to the
public line:
- numeric code
0 _
or (only in some countries):
- pulse ( EARTH or FLASH )
> _
• • • • • Set one or two pauses :
2 > - - _
• • • • • Dial your corresponent's number:
> - - 5 7 2 9 0 _
2 If the correspondent belongs to another tel-
ephone district , it is advisable to set a
pause between the international code, area
code and number of the correspondent:
0 0 3 2 - 2 - 2 2 3 5 8
3 If the correspondent uses tone dialling (mul-
tifrequency), set a temporary change of the
dial mode before the number:
0 0 8 8 6 3 * _
9
Confirm the telephone number:
EDIT ANOTHER?Y / N
10
Choose whether to program another key:
or exit from programming mode:
or
11
The next parameter appears on the display:
12
Set me back in stand-by mode:

TO PROGRAM SPEED DIALLING ...

You can assign each of the 10 pairs of number
÷
keys a telephone number that will be
(01 10)
automatically dialled during transmission after
you press the relevant pair.
Follow the one-touch dialling procedure with the
following variant:
1
Make sure that I am in stand-by mode:
2
2
3
4
- 25 -
HOW TO PROGRAM ME ...
SELECT 1-TOUCH
EDIT ANOTHER?Y / N
EDIT CODED NO.
0 7-FEB 1 4 : 2 5
0 7-FEB 1 4 : 2 5
SPEED DIAL EDIT
EDIT ONE-TOUCH
EDIT CODED NO.