Installing The Battery; Removing The Battery; Charging; Figure 7: Installing The Battery - Motorola LEX L10g User Manual

7 Push the SIM card to release it from the holder.
8 Remove the SIM card.
9 Place the battery back into the device.
10 Snap the battery cover back into place.
2.3.7

Installing the Battery

When and where to use: Perform this procedure to install a battery.
Procedure:
1 Remove the battery from the packaging.
2 Insert the battery into the battery compartment with the battery contacts facing the bottom of the
device.

Figure 7: Installing the Battery

3 Press the top of battery into place.
4 Place the battery cover into place.
5 Ensure that all battery cover snaps are fully engaged.
2.3.8

Removing the Battery

When and where to use: Perform this procedure to remove the battery.
Procedure:
1 Slide a finger nail (preferably a thumb nail) into the Battery Cover removal slot and gently pull
the Battery Cover away from the device.
2 Remove the Battery Cover.
3 Slide the Battery Lock up and hold it.
4 With the tip of your finger, lift up the battery from the side closest to the top side of the device.
2.4

Charging

Before using for the first time, charge the battery using the provided USB Charger and USB Cable or
connect the USB Cable to the USB port of a personal computer. An unused battery fully charges in
less than six hours.
The battery can also be charged by one of the optional charging cradles.
Send Feedback
MN002858A01-A
Chapter 2: Getting Started
37