Removing The Public And Private Sim Cards; Figure 6: Installing The Public And Private Sim Cards - Motorola LEX L10g User Manual

MN002858A01-A
Chapter 2: Getting Started
• Contact information, which can be moved to the People application on the LEX L10g.
• Any additional subscribed services.
NOTICE: The LEX L10g requires activated SIM cards. Obtain activated SIM cards from your
organization administrator.
NOTICE: If using a Verizon SIM card on LEX L10g device, Visual Voicemail feature is not
supported. To resolve visual voicemail issue, see
page 88.
CAUTION:
• Electrostatic discharge (ESD) precaution.
• For proper ESD precautions to avoid damaging the SIM card. Proper ESD precautions
include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
When and where to use: Use this procedure to install a SIM card:
Procedure:
1 If the battery is in place, remove the battery as described in
2 Slide the SIM card into the SIM card holder with the contacts facing down. Note the card notch
position.
3 Push that the SIM card into the holder until it is fully seated and flat.
You should hear a click when the SIM card in fully in place.

Figure 6: Installing the Public and Private SIM Cards

2.3.6

Removing the Public and Private SIM Cards

When and where to use: Use this procedure to remove the public or private SIM cards.
Procedure:
1 Press and hold the Power button for three seconds.
2 Tap Power Off.
3 Tap OK.
4 Lift the battery cover.
5 Slide the battery latch to Unlock position.
6 Lift the battery out of the device.
36
Resolving Visual Voicemail for LEX L10g on
Removing the Battery on page 37.
Send Feedback