Naming Folders; Removing A Folder; Accessing Files From A Computer; Figure 34: Opened Unnamed Folder - Motorola LEX L10g User Manual

Mission critical handheld
Table of Contents

Advertisement

MN002858A01-A
Chapter 3: Using the LEX Series Device
3.11.2

Naming Folders

When and where to use: Use this procedure to name folders. You can give folders a name after they
are created.
Procedure:
1 Tap the folder.

Figure 34: Opened Unnamed Folder

2 Tap the title area and enter a folder name using the keyboard.
3 Tap Done.
4 Tap anywhere on the Home screen to close the folder.
The folder name appears under the folder.

Figure 35: Named Folder

3.11.3

Removing a Folder

When and where to use: When a folder is no longer needed, you can remove it. Use this procedure to
remove a folder.
Procedure:
1 Tap and hold the folder until it enlarges and the device vibrates.
2 Drag the folder to X Remove until the folder turns red; then release.
The folder is removed from the screen.
3.12

Accessing Files from a Computer

When and where to use: Use this procedure to allow access to files from your computer using MTP
(media device) or using PTP (camera software).
Procedure:
1 Connect the device to your computer using a USB cable.
If one of the following messages is displayed in the notification area (top of screen): Connected
as a media device or Connected as a camera, you already have access to the files on your
device.
78
Send Feedback

Advertisement

Table of Contents
loading

Table of Contents