Resolving Visual Voicemail For Lex L10G; Requesting An Emergency Alert From Lex L10G - Motorola LEX L10g User Manual

MN002858A01-A
Chapter 4: Calling
- Dial pad touch tones — Check to play a sound when a phone key is touched.
- Quick Responses - Tap to edit quick responses to use instead of answering a call.
- Fixed Dialing Numbers — Use Fixed Dialing to restrict the phone to dial only the phone
number(s) or area code(s) specified in a Fixed Dialing list.
- TTY mode — Tap to set the TTY setting. Use an optional teletypewriter (TTY) device with the
LEX L10g to send and receive calls. Plug the TTY device into the device headset jack and set
the device to operate in one of the TTY modes.
NOTICE: Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect
the TTY device to the LEX L10g.
Set the device volume to a middle level setting for proper operation. If you experience a
high number of incorrect characters, adjust the volume as needed to minimize the error
rate.
For optimal performance, the device should be at least 30 cm (12 inches) from the TTY
device. Placing the device too close to the TTY device may cause high error rates.
+ TTY Off (default) — TTY is off.
+ TTY Full — Transmit and receive TTY characters.
+ TTY HCO — Transmit TTY characters but receive by listening to earpiece.
+ TTY VCO — Receive TTY characters but transmit by speaking into microphone.
- DTMF tones — Set the length of the DTMF tones. Available options are: Normal or Long.
- CDMA Call Settings:
+ Voice privacy — Enable enhanced privacy mode.
4.6.1

Resolving Visual Voicemail for LEX L10g

When and where to use:
If a Verizon SIM card is used in the LEX L10g and Visual Voicemail is enabled on your Verizon
account, use this procedure to turn off Visual Voicemail (which is not supported by the LEX L10g).
Non-visual voicemail will not work properly until you complete this procedure.
Procedure:
1 Contact Verizon and have them turn OFF Visual Voicemail feature.
2 From your LEX L10g device with a Verizon SIM card, dial the Verizon voicemail number *86.
3 Listen to the prompts and select Press X to turn ON/OFF Message Waiting Indication.
4 Turn ON Message Waiting Indication.
Voicemail is available to use.
4.7

Requesting an Emergency Alert from LEX L10g

This emergency alert procedure is used to indicate a critical situation and is similar to pressing the
emergency alert button on the radio. The emergency alert signal overrides any other communication
over the selected channel on the radio.
Prerequisites: The radio and the LEX L10g are successfully paired.
When and where to use: Use this procedure to use the LEX L10g to trigger an emergency alert on
the radio.
88 Send Feedback