Installing The Battery - Motorola MC65 User Manual

Enterprise digital assistant
Hide thumbs Also See for MC65:
Table of Contents

Advertisement

1 - 6
MC65 User Guide
Lifting the SIM Cover
Figure 1-5
Insert the SIM card, as shown in
4.
the door.
Inserting the SIM Card
Figure 1-6
Close SIM card holder door and slide down to lock into place.
5.
Close the rubber access door.
6.
Install the battery.
7.
NOTE For detailed information about WWAN activation and settings, refer to the MC65 Integrator Guide.

Installing the Battery

NOTE The MC65 ships with either a 2400 mAh or 3600 mAh battery. The 2400 mAh battery is shown in this
installation procedure.
To install the battery.
Insert the battery, bottom first, into the battery compartment in the back of the MC65.
1.
Press the battery down into the battery compartment until the battery release latch snaps into place.
2.
Figure 1-6
ensuring that the card slides into the holding tabs on each side of

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents