General Sound Setting; Figure 16: Sound Screen - Motorola LEX L10g User Manual

5 Select the device to show your device screen on.
Your device should now display on the other device.
6 To stop projecting your device screen, swipe down from the Status bar and tap Disconnect
under Cast screen.
2.12

General Sound Setting

Use the Sounds settings to configure media and alarm volumes.
On the Home screen, tap
Alternately, open the Notification panel and tap

Figure 16: Sound Screen

• Volumes – Use to change the volume of media, ringtones, notifications, and alarms.
• Call Ringtone and Vibrate
- Phone ringtone — Tap to select a ringtone to sound when an incoming call is received.
-
Vibrate when ringing — Check to make the device vibrate when a call is received.
NOTICE: Setting volume can also be done by pressing the Volume button, up and down,
during a call, or while playing music or a video. When not on a call, pressing the Volume
button all the way down to set the device to vibrate. During an in-coming call, pressing
the Volume button up and down changes the ringtone volume.
Send Feedback
→ → Sound.
→ Settings → Sound.
MN002858A01-A
Chapter 2: Getting Started
55