Tape Cut Length Adjustment - Ricoh C231 Service Manual

3.3 TAPE CUT LENGTH ADJUSTMENT

Adjustment standard : 250 mm ± 15 mm
1. Turn on the main body and the tape dispenser main switches.
2. Press the manual cut switch [A].
NOTE: Do not press the switch longer than 2.5 seconds.
3. Measure the tape length.
If the tape is longer than 250 mm, turn VR2 [B] counterclockwise.
If the tape is shorter than 250 mm, turn VR2 clockwise.

CAUTION
Do not turn VR1. It is for factory adjustment only.
C532
TAPE CUT LENGTH ADJUSTMENT
[B]
7-7
[A]
C532R504.PCX
SM