DRUM AND DRIVE SECTION
[B]
[A]
[E]
[F]
C231R540.WMF
4. Lift up the tension roller [E] with a screwdriver as shown.
5. Hook the stopper [F] onto the shaft [A].
6. Remove the screwdriver.
[E]
[D]
C231R541.WMF
7. Insert a screwdriver through spaces [D] and [E].
NOTE: This is to set the shaft [A] in line.
8. Tighten the screws [A], [B], and [C],shown on page 6-46 in the sequence listed.
9. Remove the screwdriver.
SM
C231
6-47