Ricoh C231 Service Manual page 126

SERVICE PROGRAM TABLE
No. Display
38 ADF Scan
Line Adjust
39 Trail Edge
Adjust
*40 Original
*41 Image
Density
*42 Print Speed
*43 Auto Cycle
Mode
*45 Std. Image
Position
52 Compress
With Start
Key
60 Clear All
Memory
61 Clear
Memory/
Except Adj.
70 Original
Feed Jam
(A)
71 Paper Feed
Jam (B)
72 Paper Wrap
Jam (E/BE)
C231
Function
Adjusts the ADF scanning
start position.
Adjusts the blank margin at
the trailing edge of prints.
Specifies the image mode at
power-up.
Specifies the image density
at power-up.
Specifies the printing speed
at power-up.
Specifies whether Auto
Cycle mode is selected at
power-up.
Specifies the image position
at power-up.
Compressing the ejected
masters is done every time
the Start key is pressed for
the master making.
Returns all SP modes to the
default settings.
Returns all SP modes to the
default settings except for
Adjustments.
Displays the total number of
original jams.
Displays the total number of
paper feed jams.
Displays the total number of
times that paper has
accidentally wrapped
around the drum.
Settings
-4.9 to
4.9 mm
0 to
3 mm
0: Letter
1: Lt/Photo
2: Photo
0: Light
1: Standard
2: Dark
3: Darker
1: 80 rpm
2: 100 rpm
3: 120 rpm
0: No
1: Yes
40: +10mm

20: 0 mm

0: -10 mm
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
4-14
Factory
Comments
Setting
• 0.1 mm
(0)
steps.
• Use the
Memory/
Class key for
"+" or "-".
• See Remark
2
0 1 mm steps.
0
1
2
1
20
0 See Remark 3
0 The memory is
cleared after
pressing the
Enter (#) key.
0 The memory is
cleared after
pressing the
Enter (#) key.
0
0
0
SM