Registration Roller Clearance Adjustment - Ricoh C231 Service Manual

PAPER FEED SECTION

6.7.4 REGISTRATION ROLLER CLEARANCE ADJUSTMENT

PURPOSE: To ensure smooth paper feed with no paper jams, folds, or wrinkles.
ADJUSTMENT STANDARD:
[C]
[A]
1. Turn off the main switch and disconnect the power plug.
2. Remove the front cover. (See 6.1.5 Other Covers.)
3. Measure the clearance [A] between the lower registration roller [B] and the
guide plate [C]. It should be 0.2 to 0.4 mm.
4. If it is not correct, adjust the position with the screw [D] after loosening the
screw [D] and [E].
5. Repeat steps 3 and 4 for the rear side of the machine.
C231
0.2 to 0.4 mm
[B]
6-28
[D]
[E]
SM