Ricoh C231 Service Manual page 103

[G]
C231I552.WMF
4. Secure the non-operation side of the ADF unit with the ADF lower rear cover
[F] (1 screw).
NOTE: 1) When you install the ADF lower rear cover [F], at first you must
open the ADF unit (flip it up) by pressing the release lever [G] as
shown above.
2) There is a switch [H] to detect whether the ADF unit is closed.
Make sure that the switch is properly activated when the ADF unit
is closed after installing the ADF lower rear cover [F]. Use care
installing the ADF lower rear cover because the rib [I] in the cover
may interfere with the movement of the switch.
3) The connector [J] is not used and remains open.
SM
[I]
3-11
INSTALLATION PROCEDURE
[F]
[H]
C231I553.WMF
[J]
C231