Changing Event In And Out Points; Trimming Events - Panasonic AJ-HPM100E Operating Instructions Manual

Changing Event IN and OUT Points

You can change the IN and OUT points for a play list event
during video playback.
3,6
1
2 4
1
Open the play list screen.
2
Select the event you want to change.
3
Press the EVENT button.
This activates the event register mode.

Trimming Events

You can change IN and OUT points for events in frame
increments (in 4-frame increments at 24PN).
1
2
1
Open the play list screen.
2
Select the event you want to change.
5 4,5
3 6 4 5
4
Register a new IN point.
Use the operation buttons or search dial to look for a
location to start an event. Then hold down the IN button
and press the ENTRY button.
5
Register a new OUT point.
Use the operation buttons or search dial to look for a
location to end an event. Then hold down the OUT button
and press the ENTRY button.
6
Press the EVENT button to end the change
operation.
◆ NOTE:
• Steps 4 and 5 can be handled as alternatives, you do not have
to carry out both steps.
• If the new IN point comes after an already registered OUT point,
the existing OUT point will be reset. A return to the play list
screen will show that the OUT point has automatically been
changed to the end of the clip.
• If the new OUT point comes before an already registered IN
point, a return to the play list will show that the IN point of that
clip has automatically been changed and registered at the
beginning of the clip.
• An event with a voice-over cannot be modified. Delete the voice-
over before modifying the event.
3
Use the cursor buttons to change the IN point.
Hold down the IN button and press the TRIM+ button or
the TRIM– button. The IN point is incremented or
decremented in frame increments (in 4-frame increments
at 24PN).
4
Change the OUT point.
Hold down the OUT button and press the TRIM+ button or
the TRIM– button. The OUT point is incremented or
decremented in frame increments (in 4-frame increments
at 24PN).
5
Change the SPLIT point
Hold down the SPLIT button and press the TRIM+ or the
TRIM– button. The split point is incremented or
decremented in frame increments (in 4-frame increments
at 24PN).
Using Play List: Editing Play Lists
65