Importing Data From The Hard Disk To A P2 Card - Panasonic AJ-HPM100E Operating Instructions Manual

Importing Data from the Hard Disk to a P2 Card

Importing Data in Partition units from TYPE
S Hard Disks and P2 Store
You can import (loading data from a hard disk to a P2 card)
data in partition units (card units) at high-speed to a P2 card
that has the same capacity as the source card.
1
Insert the P2 card to which the data will be imported.
2
Open the P2 thumbnail screen.
3
Press the MENU button.
4
Use the cursor buttons to select [HDD] – [EXPLORE]
and press the SET button.
5
Select the partition that will be copied and press the
SET button.
6
Press the MENU button.
7
Use the cursor buttons to choose [OPERATION] –
[IMPORT] – [ALL CLIP] and press the SET button.
8
Select the number of the P2 card slot where the
formatted P2 card resides to which the data will be
imported and press the SET button.
9
Select [YES] and press the SET button.
This starts importing. When the import operation ends,
"COPY COMPLETED!" appears.
◆ NOTE:
• When data is imported to a P2 card that differs from the original
P2 card, some clips may become incomplete (
Then use the reconnection function to rebuild the clip. Refer to
"Reconnecting Incomplete Clips."
• A menu setting allows you to turn verification during copying on
or off.
88
Using USB Connectors and SD Memory Cards: Using This Unit With a Hard Disk
Importing Data to a P2 Card in Clip Units
You can select a hard disk clip and import it to a P2 card.
1
Insert the P2 card where the data will be imported to.
2
Open the hard disk thumbnail screen.
3
Press the MENU button.
4
Use the cursor buttons to select [HDD] – [EXPLORE]
and press the SET button.
5
Select the partition that will be copied and press the
SET button.
6
Select a clip to copy.
7
Press the MENU button.
8
Use the cursor buttons to choose [OPERATION] –
[IMPORT] – [SELECTED CLIPS].
9
Select the number of the P2 card slot that will import
the data and press the SET button.
10
Select [YES] and press the SET button.
This starts importing.
When the import operation ends, the message "COPY
COMPLETED!" appears.
◆ NOTE:
• Verification is not performed when an entire clip is imported.
• The operation of "importing data in clip units" is almost the same
as that of "copying clips."
➝ For cautions to be observed when importing data in clip units,
refer to "Copying Clips."
!
indicator).