Warning Information Display - Panasonic AJ-HPM100E Operating Instructions Manual

WARNING information display

• A warning message is displayed whenever a warning occurs.
When no warnings have been detected, "NO WARNING" is displayed.
• When multiple warnings occur, turn the search dial to check the descriptions of each warning.
If "T&S&M" is selected in setup menu No. 006 (DISPLAY SEL), a message appears in the mode display whenever a warning
or error occurs. When multiple events occur, the event with the highest priority is displayed.
Priority Monitor display
1 CANNOT A.DUB
PLEASE SAVE
2
PLAY LIST
3 CANNOT REC
4 CANNOT PLAY
5 CANNOT ENTRY
CHECK A.SPLIT
6
POINT
7 OVER DUR TIME
8 INVALID
9 BUSY
10 INT SG
11 NO INPUT
120
For Long and Trouble-Free Operation: Error Messages
Displayed when audio voice-over cannot be recorded on a P2 card.
[Meaning]
• An attempt was made to record to a write protected disk.
• An attempt was made to record data on a card with no free memory space.
• An attempt was made to record on a card that could not be used.
• An attempt was made to record when no card was inserted
• An attempt to record was made when the number of audio voice-overs had
reached the maximum number (99).
Displayed when A. DUB is started without saving the play list.
Displayed when data cannot be recorded on a P2 card.
[Meaning]
• An attempt was made to record to a write protected disk.
• An attempt was made to record data on a card with no more free memory
space on it.
• An attempt was made to record on a card that could not be used.
• Card status changed during recording.
• Recording was attempted when the unit was BUSY.
Displayed when playback was interrupted due to a clip error or other factor.
[Meaning]
• An attempt was made to play a clip when no clips were present.
• An attempt was made to play back a card that cannot be used
• The card could not be played back or playback stopped for some other
reason
• Playback was attempted when the unit was BUSY.
Displayed when an attempt was made to register an IN, OUT or SPLIT point
in a location where such points cannot be registered.
Displayed when an audio split setting prevents the registration of an IN, OUT
and SPLIT points.
Displayed when an attempt was made to register a duration exceeding 24
hours.
Appears when there are already 100 text memos and no more memos can be
added.
Displayed while clip information is being read or when clip configuration has
changed. No operations can be performed while this display is on the screen.
[Meaning]
• A card has been inserted or removed.
• Updating is in progress
• Recording post processing is in progress
• Other causes
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT VIDEO button or the INPUT SELECT
AUDIO button is set to SG.
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT button is set to a connector with no
output except for analog audio signals.
Description
Counter
Deck operation
display
STOP CANTADUB
STOP CANTADUB
STOP CANT REC
STOP CANTPLAY
Operation
CANT ENT
continues
Operation
CANT ENT
continues
Operation
CANT ENT
continues
Operation
INVALID
continues
Operation
BUSY
continues
Operation
INT SG
continues
Operation
NO INPUT
continues