Panasonic AJ-HPM100E Operating Instructions Manual page 19

12.
GO TO/MOVE button
Use this button to move the IN point, SPLIT point, or
OUT point of events registered in a play list. It can also
be used for CUE UP when the THUMBNAIL and PLAY
LIST buttons are off. Hold down the IN/OUT button and
press the GO TO button to move and cue up to the IN
and OUT points. Hold down the SHIFT button and
press this button in the play list mode to move events.
➝For details, refer to "Using Play List."
13.
INSERT/DELETE button
Use this button to insert a new event between events in
the play list. Hold down the SHIFT button and press
this button when thumbnails are displayed to delete a
selected clip.
In the play list, hold down the SHIFT button and press
this button to delete a selected event.
➝For details, refer to "Using Play List."
14.
SPLIT/PROP button
Press the ENTRY button and this button simultaneously
in the play list register mode to register an event after
shifting the audio IN point relative to the video IN point.
Press the SHIFT button and this button simultaneously
during GUI, thumbnail, or play list display (when no
menu is displayed) to show the property of a clip or an
event.
15.
EVENT button
Press this button when the PLAY LIST button is on to
light the EVENT button. This engages the play list event
register mode and allows you to set IN, OUT, and
SPLIT points.
Press again to exit the event register mode and return
to the previous screen. The EVENT button goes out.
16.
LCD panel
➝For details, refer to "LCD Panel."
Introduction: Control Reference Guide
19