Table of Contents
Advertisement
E.5 Optional T1000 2-Post Rack Slide Installation Kit - 90400
T1000 Series UPS 2-Post Rack Slide Kit Installation Instructions- 94030-001
1. 2-Post Rack Slide Kit
Use the 2-Post Rack Slide Kit 90400 (1 kit per module) to mount a T1000 module with slides in a 19-inch,
2-Post rack. The slide assemblies are non-handed, and are provided with a lock-open feature and a quick
disconnect for the Inner Slide Member. When the Inner Slide Member is disconnected, the E-Z Rail latch in
the slide assembly locks the Middle Member in the fully open position until the Inner Member is reinstalled.
2. Contents - 2-Post Rack Slide Installation Kit (90400)
1 ea.: T1000 Series UPS 2-Post Rack Slide Kit Installation Instructions - 94030
2 ea.: Slide, 22 in., 370EZ-22
1 ea.: BK-4-EZ 2-Post Rack Bracket Kit, containing:
4 ea.: 2-Post Rack Bracket JES P/N 2496052
8 ea: Screw, FHP (Flat Head Phillips) 8-32 x 3/8 in.
8 ea: Nut, serrated head, 8-32
8 ea: Screw, PHP, (Pan Head Phillips) 8-32 x 1/4 in. (for mounting inner slide member)
16 ea.: Cage Nut, 1/4"-20
16 ea.: SEMS Hex bolt, 1/4"-20 x 5/8" (with assembled washer) for racks with 1/4"-20 tapped
holes.
16 ea.: SEMS Hex bolt, 10-32 x 5/8" (with assembled washer) for racks with 10-32 tapped holes.
3. Attach E-Z Rail to Module
4
1
No.
1
2
3
4
1. Remove the EZ Rail (Slide Rail Inner Member), Figure 1-(1), from the Slide Rail Middle Channel,
Figure 1-(2), by pressing the E-Z Rail Latch, Figure 1-(4), and sliding the EZ Rail out of the Middle
Channel. Repeat for the second Slide Assembly.
FIGURE 2: INSTALL INNER SLIDE MEMBER ON LEFT AND RIGHT SIDES OF MODULE(S)
2. Attach an EZ Rail to each side of the UPS module using 4 x Phillips 8-32 x 1/4". Orient the inner
Slide Member so the rounded end is towards the rear of the module. (Figure 2)
T1000 Series UPS Installation and Operation Manual – 91074-002
2
Slide Rail Inner Member (EZ Rail)
Slide Rail Middle Channel
Slide Rail Outer Channel (Outer Rail Sleeve)
E-Z Rail Latch
FIGURE 1 SLIDE ASSEMBLY
7 in.
7 in.
(178 mm)
(178 mm)
4 @ PHP
8-32 x 1/4 in.
ITEM
5 in.
(127 mm)
3
Slide Rail
Inner Member
E-11
Advertisement
Table of Contents
