Suzuki Ozark Service Manual page 353

BRAKE/TAILLIGHT
Replace the brake/taillight bulb as follows:
• Turn the socket counterclockwise.
• Push the bulb in and turn it to the left. Remove the bulb.
• To install a new bulb, push the bulb in firmly turn it to the right
while pushing in.
TURN SIGNAL LIGHT
To replace the turn signal light bulb, follow the procedure
belows.
• Remove the screws and the lens.
• Push in on the bulb, turn it to the left, and pull it out.
• To fit the replacement bulb, push it in and turn it to the right
while pushing.

Overtightening the screws may cause the lens to
crack.
Tighten the screws only until they are snug.
LT-F250K6 ('06-MODEL) 13-25