Suzuki Ozark Service Manual page 215

• Install the new O-ring to the brake panel.

Replace the removed O-ring with a new one.
• Apply SUZUKI SUPER GREASE "A" to the anchor pin and
brake camshaft sliding surface lightly.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)

Be careful not to apply too much grease to the brake
camshaft and pin. If grease gets on the lining, brake
slippage will result.
• Install the brake shoes and springs to the brake panel.

Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
NOTE:
* When reinstalling the removed brake shoes, install them in
their original position, leading and trailing.
* Make sure that the brake shoe spring's end faces the brake
panel as shown.
CHASSIS 7-51