Suzuki Ozark Service Manual page 244

8-18 ELECTRICAL SYSTEM
Measure the ignition coil primary peak
voltage. ( 8-19)
NOTE: The ignition coil peak voltage
inspection method is applicable only with the
multi circuit tester and the peak volt adaptor.
Incorrect
Inspect the ignition coil. (
Correct
Measure the pickup coil peak voltage and
resistance. ( 8-20 to 8-21)
NOTE: The pickup coil peak voltage
inspection is applicable only with the multi
circuit tester and the peak volt adaptor.
Correct
8-20)
Inspect the spark plug.
Correct
(
Correct
• Improper spark plug
connection
• Faulty ignition coil
Incorrect
Incorrect
• Faulty pickup coil
• Faulty CDI unit
• Open circuit in wiring
harness
• Improper ignition coupler
connection
2-6)
Incorrect
• Faulty spark plug