Suzuki Ozark Service Manual page 110

3-70 ENGINE
• Install the clutch shoe and washer.
• Before installing the clutch shoe nut, apply engine oil to the
thread and inside surface of the nut.
• Install the clutch shoe nut.

Apply engine oil to the clutch shoe nut.
• Tighten the clutch shoe nut to the specified torque while hold-
ing the generator rotor with the special tool.
 09930-44520: Generator rotor holder

The clutch shoe nut has left-hand threads.
 Clutch shoe nut: 140 N·m (14.0 kgf-m, 101.5 lb-ft)
• Install the clutch release ball inner guide 1 and release ball
2.
CLUTCH COVER
• Install the dowel pins and new gasket.