Suzuki Ozark Service Manual page 128

4-8 DRIVE TRAIN
• Remove the pinion gear pilot bearing with the special tools.
 09921-20210: Bearing puller
09930-30104: Sliding shaft
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.

The removed bearing must be replaced with a new
one.
UNIVERSAL JOINT
• Remove the C-rings from the universal joint.

Replace the removed C-ring with a new one.
• Remove the bearings by tapping with the special tool and
hammer.
 09913-70210: Bearing installer set
• Remove the universal joint.