1900-A2-GN20-00
Step
Procedure
5.)
Verify all necessary BS 1900 system components, hardware,
circuit packs, and cables are at the installation site and that they
are in good condition. If a Materials List is provided, verify the
packing list with it.
6.)
Determine if an AC or DC power card is to be used in the
configuration.
a.) If installing a DC power card, install the -48 V DC power
source.
7.)
Complete all remaining tasks in the order given unless otherwise
directed.
STOP
<RX KDYH FRPSOHWHG WKLV WDVN
BitStorm 1900 Installation and Maintenance Guide
2. BitStorm 1900 Installation and Testing
(continued)
2-37