Table of Contents
Advertisement
2. BitStorm 1900 Installation and Testing
2-94
Step
Procedure
14.)
From this screen changes to the
Current Poll Interval
can be made. Refer to the following table as a guide for these
settings. If there are no changes, press
to the next item.
Setting
Community Name
Current Poll Interval
Set Trap Targets
BitStorm 1900 Installation and Maintenance Guide
Community Name
Set Trap Targets
, and
Description
Community Name
The
as a minimum security control tool much like a user
ID and/or password.
• For this field, enter an identifier of up to 15 alpha
characters.
Current Polling Interval
The
provides the ability to set the poll interval in number
of seconds. The SNMP Agent polls the modems
every n seconds for trap conditions (alarms).
(n=how often the equipment is polled.)
• The acceptable range is 5 to 60 seconds
(inclusive).
• To disable the polling, set the poll interval to 0.
Set Trap Targets
Address of the Network Management Stations
where the SNMP Traps are designated to.
• Up to 3 Trap Targets can be set.
(continued)
,
to continue
< E n t e r >
is used by SNMP V1
is used to set the IP
1900-A2-GN20-00
Advertisement
Table of Contents
