Table of Contents
Advertisement
2. BitStorm 1900 Installation and Testing
2-88
Using SNMP Network Management Software
If the client is using SNMP Network Management Software, our
private MIB must be loaded into the user's SNMP Network Manager
using the procedure accompanying the specific Network Management
Software.
A list of all supported MIBs and the private MIB can be found in
document 1900-A2-GK40, BitStorm 1900 IP DSLAM Supported SNMP
MIBs. This document and private MIBs can be downloaded from the
Paradyne website at www.paradyne.com.
Using Telnet for Remote Provisioning and Management
NOTE: Before using the Telnet option for remote management, the MIU must
first be configured using the craft interface. This procedure is
mandatory as an MIU I.P. address is required when accessing the MIU
remotely.
The following steps and procedures are provided to aide in configuring
the MIU and setting the traps. (This is intended as a brief overview.
Refer to document 1900-A2-GK40, BitStorm 1900 IP DSLAM
Supported SNMP MIBs, for more detailed information.)
Step
Procedure
1.)
Initiate a Telnet session:
a.) From Windows, click on the
BitStorm 1900 Installation and Maintenance Guide
button, then select
S t a r t
1900-A2-GN20-00
.
R u n
Advertisement
Table of Contents
