Omron ns series Operation Manual page 79

4. Input the desired value. The input format for the Set Timer/Counter Value Dialog Box
depends on the timer/counter operating mode of the PLC (BCD or binary), and not on
the display format of the ladder monitor.)
When the timer/counter operating mode is BCD, the input format for the Set
Timer/Counter Value Dialog Box will be BCD.
When the timer/counter operating mode is binary:
•
If the set value is in hexadecimal (e.g., #100), the input format for the Set
Timer/Counter Value Dialog Box will be hexadecimal and the A to F Buttons will be
displayed.
• If the set value is in decimal (e.g., &100), the input format for the Set Timer/Counter
Value Dialog Box will be decimal.
5. Press the Set Button.
When a timer/counter set value is changed, the screen display will be updated to reflect
the change.
• When the Set Value Is Specified by an Address
When the timer/counter set value is specified by an address, use the following method to
change the present value of the specified I/O.
1. Press the second operand (i.e., the timer/counter set value) of the TIM/CNT
instruction in the ladder display area to select it (i.e., to display the cursor).
2. Press the Change Value Button.
(2) Press the Change Button.
3. The Change Value Dialog Box will be displayed.
3-8 Changing Timer/Counter Set Values
(1) Select the
timer/counter
set value.
77