Omron ns series Operation Manual page 124

3-2 Extracting and Storing the File in the Memory Card
Step 2: Choose the PLC for the CXT file.
1. Specify the PLC in the CXT file from the pull-down list under Project.
2. Click the OK Button.
Note: The selected PLC must be a CS/CJ-series PLC.
Step 3: Specify the destination file name and perform extraction and
Specify the file name that the created I/O comment file of Ladder Monitor will be output
after the extraction and conversion.
1. Click the Browse Button and select the file name.
2. Type the file name in the file name field (up to 14 characters).
3. Click the OK Button.
18
conversion.