Omron ns series Operation Manual page 75

2. The Check Forced Bits Dialog Box will be displayed.
3. To check the addresses with forced status, press the Scan All Button. A list of
addresses with forced status will be displayed.
4. To cancel the forced status of all addresses, press the Cancel All Button.
5. A message will be displayed for confirmation. Press the OK Button.
6. To have the Scan All Dialog Box displayed when the Ladder Monitor is started or
stopped, select Execute for Check forced status before start/end of ladder monitor.
•
The Continue Button is displayed in the Check Forced Bits Dialog Box that is
Note
displayed when starting the Ladder Monitor. Check the forced status before
pressing this button.
• The Operat Screen Button and the Continue Button are displayed in the Check
Forced Bits Dialog Box. Press the Operat Screen Button to exit the Ladder Monitor
or press the Continue Button to continue using the Ladder Monitor.
• The addresses of up to 100 forced bits can be displayed in the Check Force Bits
Dialog Box.
•
When connected to a CJ2 CPU Unit, a confirmation dialog box will be displayed if
there is forced status when the Ladder Monitor is started or exited.
3-7 Changing Address Status/Contents
73