Omron ns series Operation Manual page 80

3-8 Changing Timer/Counter Set Values
4. Input the new value. If the timer/counter operating mode at the PLC is BCD, the
input format for the Change Value Dialog Box will be BCD.
If the operating mode is binary, the display format for I/O status monitoring will be as
shown in the following table.
Hexadecimal
Decimal
Signed decimal
5. Press the Update Button.
•
If I/O status monitoring is stopped, start I/O status monitoring before changing
Note
timer/counter set values. Do not change timer/counter set values while I/O status
monitoring is stopped.
•
The program is changed when a timer/counter set value is changed. If a
timer/counter set value is changed from the Ladder Monitor while monitoring with the
CX-Programmer, use the CX-Programmer to transfer the program from the PLC to
the personal computer so that the programs will match.
78
Display format
Select one of the following in the Change Value Dialog Box.
• Hexadecimal (default)
• Decimal
Select one of the following in the Change Value Dialog Box.
• Hexadecimal
• Decimal (default)
Input format