Release Button - HP ProLiant BL460c Maintenance And Service Manual

Remove the server blade handle.
8.
To replace the component, reverse the removal procedure.

Release button

To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 22).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
Remove the front panel/hard drive cage assembly
7.
page 27).
("Access panel" on page 23).
("Hard drive" on page 24).
("Hard drive blank" on page 23).
("Hard drive backplane" on page 26).
("Front panel/hard drive cage
Removal and replacement procedures 32
assembly" on