Apply all the grease to the top of the processor in one of the following patterns to ensure even
6.
distribution:
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern).
Install the heatsink.
7.
Install the front panel/hard drive cage assembly.
8.
Install the hard drive backplane.
9.
Install the hard drive blank.
10.
Install the hard drives.
11.
Install the access panel
12.
Install the server blade.
13.
System board
To remove the component:
("Access
panel" on page 23).
Removal and replacement procedures 39