Installing The Switch; Installation Flow - H3C S5120-EI series Installation Manual

Installing the switch

WARNING!
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact the local agent of H3C for permission. Otherwise, H3C shall not be liable for any
consequence caused thereby.

Installation flow

Figure 1 Hardware installation flow of the switch
Install the switch to a 19-in
No
modules, connectors, and
Start
rack or workbench
Ground the switch
Connect the power
cord
Verify the installation
Power on the switch
No
Operating properly?
Yes
Install interface cards?
Yes
Install interface cards
No
Operating properly?
Yes
Connect transceiver
cables
End
Troubleshoot
the switch
Power off the
switch
Troubleshoot
the switch
4