H3C S5120-EI series Installation Manual page 59

Transceiver module
SFP-GE-LH40-SM1550
SFP-GE-LH70-SM1550
SFP-GE-LH100-SM1550
These two
SFP-GE-LX-SM1
transceiv
310-BIDI
er models
must be
SFP-GE-LX-SM1
used in
490-BIDI
pairs.
SFP-GE-T
Table 23 10GE SFP+ transceiver modules and SFP+ cables
Transceiver Transceiver
module/Cab module/Cab
le type le
SFP-XG-SX-M
M850-A
SFP-XG-LX220
10 GE SFP+
-MM1310
transceiver
SFP-XG-LX-SM
module
1310
SFP-XG-LH40-
SM1550
LSWM1STK
LSWM2STK
Short-haul 10
GE SFP+
LSWM3STK
cable
LSTM1STK
LSWM4STK
NOTE:
To guarantee the functionality of the SFP/SFP+/XFP ports, always use H3C transceiver modules on the
•
S5120-EI Switch Series.
The transceiver modules available for this switch are subject to change over time. For the most up-to-date
•
list of transceiver modules, consult your H3C sales representative or technical support engineer.
• For the transceiver module specifications, see
Manual
. For how to install a transceiver module, see
Modules Installation Guide
Central
Connector
wavelength
1550 nm LC
TX: 1310 nm
RX: 1490 nm
LC
TX: 1490 nm
RX: 1310 nm
N/A RJ-45
Central
Connector
wavelength
850 nm
1310 nm LC
1550 nm
N/A N/A
H3C Low End Series Ethernet Switches Pluggable Modules
.
51
Fiber
9/125 μm single mode
optical fiber
9/125 μm single mode
optical fiber
Twisted pair cable
Fiber
50/125 μm multimode
optical fiber
62.5/125 μm
multimode optical fiber
9/125 μm single mode
optical fiber
9/125 μm single mode
optical fiber
SFP+ cable
H3C Pluggable SFP/SFP+/XFP Transceiver
Max transmission
distance
40 km (24.86 miles)
70 km (43.50 miles)
100 km (62.14
miles)
10 km (6.21 miles)
100 m (328.08 ft)
Max
transmission
distance
300 m (984.25
ft)
220 m (721.78
ft)
10 km (6.21
miles)
40 km (24.86
miles)
0.65 m (2.13
ft)
1.2 m (3.94 ft)
3 m (9.84 ft)
5 m (16.40 ft)
10 m (32.81 ft)