S5120-52C-Ei - H3C S5120-EI series Installation Manual

S5120-52C-EI

Figure 39 S5120-52C-EI front panel
(1) 10/100/1000 Base-T auto-sensing Ethernet port
(2) 10/100/1000 Base-T auto-sensing Ethernet port status LED
(3) Console port
(5) Port mode LED (Mode)
(7) RPS status LED (RPS)
(9) Interface card 2 status LED (MOD2)
(11) 1000 Base-X SFP port
Figure 40 S5120-52C-EI rear panel
(1) AC power input
(3) Grounding screw
(5) Interface card slot 2 (MOD2)
NOTE:
The S5120-52C-EI is shipped with the two expansion interface card slots covered by filler panels. You can
select one or two interface cards for your switch as needed. For the interface cards available for the
S5120-EI Switch Series, see
removing an interface
"Interface cards." For how to install an interface card, see
card."
35
(4) Seven-segment LED
(6) System status LED (PWR)
(8) Interface card 1 status LED (MOD1)
(10) Port status LED mode switching button
(12) 1000Base-X SFP port status LED
(2) RPS power input (shipped with a protective cover)
(4) Interface card slot 1 (MOD1)
"Installing and