S5120-28C-Pwr-Ei - H3C S5120-EI series Installation Manual

(5) Port mode LED (Mode)
(7) RPS status LED (RPS)
(9) SFP port
Figure 44 S5120-48P-EI rear panel
(1) AC power input
(3) Grounding screw
NOTE:
The S5120-48P-EI does not support interface cards.

S5120-28C-PWR-EI

The S5120-28C-PWR-EI includes two models: PoE and PoE+.
The front panels of the PoE and PoE+ models are the same in appearance. See
•
The PoE+ model has a PoE+ label on its rear panel, as shown in
•
power per port is 30 W.
• The PoE model has no PoE+ label on its rear panel, as shown in
per port is 15.4 W.
For more information about the PoE power supply, see
Figure 45 S5120-28C-PWR-EI front panel
(1) 10/100/1000 Base-T auto-sensing Ethernet port
(2) 10/100/1000 Base-T auto-sensing Ethernet port status LED
(3) 1000 Base-X SFP port
(5) Console port
(7) Port mode LED (Mode)
(9) RPS status LED (RPS)
(11) Interface card 2 status LED (MOD2)
(6) System status LED (PWR)
(8) Port status LED mode switching button
(10) SFP port status LED
(2) RPS power input (with filler panel)
(4) "DO NOT REMOVE" label
Table 8.
(4) 1000Base-X SFP port status LED
(6) Seven-segment LED
(8) System status LED (PWR)
(10) Interface card 1 status LED (MOD1)
(12) Port status LED mode switching button
37
Figure
Figure 46. The maximum PoE
Figure 47. The maximum PoE power
45.