Mounting The Switch On A Workbench - H3C S5120-EI series Installation Manual

Figure 10 Front and rear mounting bracket installation (2)
(1) Load-bearing screw
(3) Front panel
(5) Front mounting bracket

Mounting the switch on a workbench

In many cases, standard 19-inch racks are not available. Switches are often placed on clean
workbenches.
To place the switch on a workbench:
1. Make sure the workbench is flat and sturdy.
2. Place the switch with bottom up carefully, and then clean the round holes on the chassis bottom
with dry cloth.
(1) (2)
(4)
(5)
(6)
(2) Rear mounting bracket
(4) Screw used to attach front mounting brackets to front brackets
(6) Front square-holed post
11
(3)