Adjusting Temperature - Rinnai infinity 16 User Instruction

Additional SAFETY features
The Transfer button on the Bath Control enables you to select and lock the preferred
temperature for shower or bath water. When locked in. this selected temperature cannot
be overridden by the Kitchen Control.
While the hot water tap is open,
the following safety features apply.
*Temperature selection cannot be
transferred. (When optional Bath
Control is fitted.)
l
Water temperature cannot be altered.
*The Remote Control cannot be
turned ON.
The temperature of outgoing hot water is constantly monitored by a built in
sensor. If the temperature of the outgoing hot water rises to more.than 3'C
above the selected temperature shown on the Digital Monitor, the burner will
automatically go out. The red operation lamp will also go out. The burner
will ignite again once the outgoing hot water temperature falls to that shown
on the Digital Monitor.
Using the Infinity 16 with Optional Control
To TURN ON your hot water system,
Press the ON/OFF button on either
remote control.
After Installation, and when the ON/
be displayed on the Digital Monitor.
ADJUSTING
TEMPERATURE
The temperature can only be
adjusted on the Remote Control
where the ON indicator is
glowing,
and the same
temperature will be displayed
on all Controls.
-9-