Rinnai infinity 16 User Instruction page 3

The Infinity 16 is one of a range of the most advanced water heaters available.
The Infinity 16 is an externally mounted, power flued appliance. It is very compact,
saving both floor and wall space
The Kitchen Remote Control is normally fitted in the kitchen or other convenient area.
A second, Bath Control (Optional) is avsailable for fitting in a bathroom or ensuite.
The Kitchen Control selects temperature for the kitchen, laundry, etc.
The temperature selected on the Remote Control is the maximum temperature of hot
water that will be supplied at the tap.
The temperature selected at the remote control is retained in the system memory.
The Infinity never runs out of hot water.
While electricity, water and gas supplies are
connected. hot water is available whenever the hot water tap is open.
The burner lights automatically when the hot water tap is opened, and goes out when
the tap is closed. Ignition is electronic; there is no pilot light. When the hot water tap
is off, no gas is used.
A.G.A.'s 4 Star Energy Rating shows that the Inlinity 16 is one of the most efficient
water heaters available.
Built into the main micro-processor is the facility to LIMIT THE MAXIMUM TEMPERATURE
of the hot water supplied by the Infinity 16. The water temperature may be limited to
40-C, 5O'C or 55°C. This is particularly useful when the Infinity I6 is installed where
young children or the infirm may be using the hot water. If required, the temperature
limits can be set by a service technician. For further information, please contact Rinnai.
Operating noise level is very low.
Error messages are displayed on the Remote Control, assisting with service.
-2-
1