Rinnai infinity 16 User Instruction page 4

Always check water temperature by
hand before entering the shower or
bath. The temperature
may have been
The water temperature cannot be
adjusted when the hot water tap is
Depending on the weather conditions
and the length of the pipe between the
Infinity 16 and the tap in use,
In areas with very cold
incoming water tempera-
there may be a variation between the
temperatures displayed at the Remote
Control and the temperature of the
water at the tap.
temperature, there may
be a difference between
the temperature displayed
on the remote control and
the temperature of the hot water at
the tap. To increase the temperature
of hot water to that shown on the
control, simply reduce the water flow
at the hot tap manually.
There is no need to turn the Infinity
16 off at the Remote Control after use.
However, if you prefer to turn the
Water flow needs to be more than
2.5L/min. to operate the Infinity 16.
Hot water temperature may vary at low
water flows, or the Infinity 16 'may go
will be stored in the system memory
at all times while mains power remains
connected.
out without warning.
-3-