Rinnai infinity 16 User Instruction page 21

NOTE: Please read pages 18 and 19
prior to fitting Remote Controls.
W FITTING THE KITCHEN CONTROL
W-33-1A
0 Determine the most suitable
position for the Control.
Consider access by children.
0 Fix the wall bracket to the wall
as shown. (fig 1)
0 The Remote Control cable is to
connect the Remote Control to the
Infinity 16.
0 Make a suitable sized hole
through the wall in the centre
opening of the wail bracket. Run
the cable between the Control and
the Infinity 16, or refer to page 19,
No. 8.
0 Connect the cable to the Control
as shown (fig 2).
l
Attach the Control to the bracket
as shown, secure with the single
screw at the top (fig 3).
0 The cable clamp and screws are
provided to secure the cable to the
Remote Control if the cable cannot
be run in the wall cavity. In this
case, the plastic "Knockout" should
be removed from the top or bottom
of the Control (fig 4).
Outline of
Remote
Control
\
(fig (fig
2)
+-Securing Screw
I
Ifig 31
- 20 -