Rinnai infinity 16 User Instruction page 11

The Transfer button on the Bath Control (Optional Control), enables you to select and lock
the preferred temperature for shower or bath water. When locked in, this selected temperature
cannot be overridden by the Kitchen Control.
To transfer priority of water
temperature selection to the
Bath Control, simply press the
ITRANSFER I button on the
Bath Control.
The ON indicator on the Bath
Control will glow to indicate that
After having transferred the
priority of water temperature
priority of water temperature
selection has been transferred selection, 40°C will be displayed
to the Bath Control.
on the Digital Monitor.
a
The water temperature can now be
selected using the Bath Control.
The maximum temperature which
can be selected at the Bath Control
is 50%. This is to help reduce the
risk of burns from hot water.
A different temperature can be
stored in the system memory of
the Bath and Kitchen Controls.
Burns from hot tap water can result
in very severe injuries to young
children.
Hot water at 65'C (the average hot
water temperature in Australia) can
severely burn a child in less than
half a second. At 50°C it takes five
minutes.
Burns can happen when children
turn on the hot water tap and they
are under it, or when they are placed
into a bath which is too hot.
8
To transfer priority of water
temperature selection back to
the Kitchen Control, simply press the
m button again. The
temperature displayed will then
return to the temperature which
was previously selected at the
Kitchen Control, or 5O'C, whichever
is the lower. The ON indicator on
the Kitchen Control will glow to
indicate priority control of water
temperature selection.
Priority temperature selection cannot be transferred
when a hot water tap is open.
- 10 -