Job Manager - Konica Minolta DRYPRO SIGMA Installation Manual

Film Cartridge State
Not ready
Cartridge closure is
pending
Related topics
Calibrate the Imager for the Installed Film

Job Manager

Job Manager Status
Active
No Media
Offline
Related topics
Load a Different Film Size to Match a Print Request
9G7564_en | 2013-04-01
Display Screen
Various
Power symbol is green
Calibrate symbol is off
Pause symbol is on
Display Screen
Not Applicable
Power symbol is green
Film Size symbol is yellow
The required film size is shown
on the display screen
Status code: 704
Power symbol is green
Maintenance and Troubleshooting
Web Portal Description
Not Ready When the conditions are cor-
rected, the laser imager can
print.
Pause Requested You pressed the Pause button,
but the rollback has not
started because films are still
moving through the laser
imager. When the closure is
complete, the Pause symbol is
off. At this time, you can
remove the film cartridge.
Web Portal Description
Shows how The laser imager is accepting
many print DICOM job requests and film
requests have is available for all current jobs.
been initiated.
Shows how The laser imager is accepting
many jobs with DICOM job requests but film
this status are in of the correct size and type is
the job queue. not available for at least one
current job.
DICOM Offline The laser imager cannot
accept any DICOM job
requests. Restart the laser
imager.
3–9