Preventive Maintenance; About The Filter; Replace The Filter - Konica Minolta DRYPRO SIGMA Installation Manual

Laser imager print
Hide thumbs Also See for DRYPRO SIGMA:
Table of Contents

Advertisement

Maintenance and Troubleshooting

Preventive Maintenance

Note
These conditions are also reported at the Web Portal.

About the Filter

Caution
In the U.S., exhausted filters are considered to be non-hazardous waste according to the US
Environmental Protection Agency Resource Conservation Recovery Act (RCRA). Municipality
owned and licensed solid waste management facilities are an appropriate disposal option.
Contact your local or state solid waste authorities to determine if additional disposal requirements
apply. In other regions, contact local or regional solid waste authorities for proper disposal
guidance.
The deodorant filter controls processing odors in the laser imager. The filter in the laser
imager must be replaced after 7500 prints. Keep at least one filter available to be ready
to replace it when needed.

Replace the Filter

When the filter must be replaced, the display screen shows the error code 449 and the
Maintenance symbol.
1. Open the film supply.
2. Remove the deodorant filter (1) by lifting it up and pulling it forward.
3–2
9G7564_en | 2013-04-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents