Film Cartridge Information - Konica Minolta DRYPRO SIGMA Installation Manual

Basic Operating Tasks

Film Cartridge Information

Film Count
The film count displays on the imager display screen.
Figure 4: In the example, 125 indicates a full film cartridge.
Size of the Loaded Film
The film size displays in the same location as the film count. The display screen alternates
between the film count and the size of the loaded film.
Figure 5: In the example, "35" indicates the 1st dimension of the film cartridge. For example,
"35" then "43" appears if 35 x 43 cm film is loaded. Then the film count displays again.
Film Count Flashes "0"
When the film cartridge is empty, the film count flashes "0" and the power symbol is
yellow, which indicates that the imager cannot print. Replace the film cartridge with a
new one with the appropriate size film.
Figure 6: When the film count is "0," you must replace the film cartridge before you can print
again.
Related topics
Insert a New Film Cartridge
2–6 9G7564_en | 2013-04-01