Installing Another Language - Ricoh D037 Service Manual

Installing Another Language

5.3 INSTALLING ANOTHER LANGUAGE
Many languages are available. But you can only switch between two languages at a time.
Do the following procedure to select the two languages you want. You can select both of
the languages you want from the user interface on the operation panel.
1. Switch the copier main power switch off.
2. Remove the SD slot cover (
3. Insert the SD card with the language data into SD Card Slot 2.
4. Switch the copier main power switch on. The initial screen opens after about 45
seconds.
5. Touch "Language Data (2)" on the screen (or press
6. Touch "LANG. 1(1)" or "LANG. 2(2)"
Key
LANG. 1(1)
LANG. 1(2)
Exit(0)
7. Touch "LANG 1(1)" to select the 1st Language. Touch "LANG (2)" to select the 2nd
Language.
D037/D038/D040/D041
x 1).
What it does
Touch this button on the screen (or press
open the next screen so you can select the 1st language.
Touch this button on the screen (or press
open the next screen so you can select the 2nd language.
Touch this key on the screen (or press
quit the update procedure and return to normal screen.
).
5-16
on the 10-key pad) to
on the 10-key pad) to
on the 10-key pad) to
SM