Ricoh D037 Service Manual page 611

The paper trailing edge area can be adjusted with SP2524.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 1: Switch Timing: T-Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2524
plate at the paper trailing edge between the erase margin area and the image
area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
2530 [Thick 1: Env. Correct Table]
003 Paper Transfer: BW: 1st
004 Paper Transfer: BW:2nd
005 Paper Transfer: FC: 1st
006 Paper Transfer: FC:2nd
[Thick 2: Bias: BW]
Adjusts the current for the paper transfer roller for thick2 paper in
2553
black-and-white mode.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
2558 [Thick 2: Bias: FC]
SM Appendix
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to -100 / 0 / 2 mm/step]
*ENG
*ENG
[1 to 50 / 17 / 1 /step]
*ENG
[1 to 50 / 15 / 1 /step]
*ENG
[1 to 50 / 29 / 1 /step]
*ENG [1 to 50 / 19 / 1 /step]
*ENG [0 to 200 / 10 / 1 –μA /step]
*ENG
[0 to 200 / 10 / 1 –μA /step]
9-77
System Service Mode
D037/D038/D040/D041