Ricoh D037 Service Manual page 587

2220 [Skew Origin Set]
001 C:Skew Motor
002 M:Skew Motor
003 Y:Skew Motor
[LD Power: Fixed] LD Power Control
Adjusts the fixed LD power for each line speed and color.
2221
These SPs are activated only when SP3-041-002 is set to "0".
Normal: 120 mm/sec, Low: 60 mm/sec
001 Bk:Normal Spd
002 C:Normal Spd
003 M:Normal Spd
004 Y:Normal Spd
009 Bk:Low Spd
010 C:Low Spd
011 M:Low Spd
012 Y:Low Spd
[Dev. DC Bias:Fixed] Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore,
adjusting these settings has no effect while Process Control (SP3-041-001
2229
Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP
modes are used for printing.
Normal: 120 mm/sec, Low: 60 mm/sec
001 Plain: Bk
SM Appendix
*ENG
-
*ENG
*ENG
*ENG
[0 to 200 / 100 / 1%/step]
*ENG
Increasing this value makes the
*ENG
image density darker.
*ENG
*ENG
*ENG
*ENG [0 to 800 / 450 / 10 –V/step]
9-53
System Service Mode
D037/D038/D040/D041