Sd Card Appli Move - Ricoh D037 Service Manual

SD Card Appli Move

5.6 SD CARD APPLI MOVE
5.6.1 OVERVIEW
The service program "SD Card Appli Move" (SP5-873) lets you to copy application
programs from one SD card to another SD card.
Slot 1 and Slot 2 are used to store application programs. However, more than two optional
applications are supplied for this machine. In that case, you can move application
programs from Slot 2 to Slot 1 with the following procedure.
Consider the following limitations when you try to merge SD cards.
PostScript3 cannot be moved to the other SD card.
The destination SD card should have the largest memory size of all the application SD
cards. Refer to the following table for the memory size of each SD card.
Outline of SD Card Appli Move:
1. Choose a SD card with enough space.
Do not use an SD card if it has been used on a computer. Normal operation is
not guaranteed when such an SD card is used.
2. Enter SP5873 "SD Card Appli Move". Then move the application from the SD Card in
Slot 2 to the card in slot 1.
3. Exit the SP mode
Use caution when you do the SD Card Appli Move procedure:
The data necessary for authentication is transferred with the application
program from an SD card to another SD card. Authentication fails if you try to
use the SD card after you copy the application program from one card to
another card.
D037/D038/D040/D041 5-22 SM